The burnishing or the extractor side didn’t work so I used the third one now this fourth method is really proven it works well I just used uh vice grips and it worked perfect if any of the other methods don’t work this is for sure gonna make it that’s why I call it the last resort this one is really gonna take that out I’m using my dremel tool and it comes with these accessories I’m using this dremel thin cut circular uh disc just like what you see here is super thin and it only works with this dremel mandrel, okay so this is a pretty quick easy in and out insert I really like this again Outdoor Screws all the tools I use in this I’ll leave it in the description below but this is uh proven you will get this screw out it’s just that this one if you’re using this circular accessory right here it’s great for the raised screws just like what you see here if it’s buried deep in there I’ll show you a different method for that if you don’t want to end up damaging the surrounding areas. Large metal corner brackets. Metal corner brackets for wood. Heavy duty metal corner brackets. Long metal corner brackets. Metal corner brackets screwfix. Decorative metal corner brackets. Corner brace brackets. L brackets.
Outdoor screws screwfix. Railway Sleeper Brackets. Screwfix railway sleeper brackets. Railway sleeper brackets b&q. So that’s why I’m saying make sure that you use this only for race screw bits or screw heads just like what you see here again we’re gonna notch it out on both ends I’m slowly just grinding off each and what I’m trying to create here is an actual pathway for a flat head screwdriver to sit on okay so just be very careful again be careful with all the sparks may use fire retardant fabric around here which I wish I used okay just to be safe and then after that you can use your flat head screwdriver to unscrew that again when you’re using this uh Dremel it’s gonna create sparks make sure there are no flammables around okay and if you don’t want to go through all that trouble and this also works really well for those broken screw heads.
Okay just cut them off just like that now last resort number two I made yes I made number two now this one is for those screw heads that are buried deep in there okay now this bit right here is from the Dremel bit and it has that nice pointy drill bit tip just like you see there and this works for those screw heads that are buried deep and you don’t want to disturb or cut the surrounding areas or wood so what you’re going to do again is the same concept with the last resort part one you’re just gonna start chiselling off or start drilling off those sides so that you can make those channels for a flat head screwdriver to work and after you do that boom it works right well works really great you can take that off easily okay now we’re going to be working with what about this the broken screw heads here I have a drywall screw head that’s broken a general-purpose.

